42
41
Problem
Check
Unit has no power.
●
Did you insert the battery with the correct
polarity?
●
Are the batteries drained?
●
Is the AC adaptor connected correctly?
●
Is the door open?
Earphones don’t work.
●
Is the volume control on the unit at the minimum
setting?
A sound or track is
skipped.
●
Was the unit jolted or knocked?
●
Is there dust, fingerprints or scratches on the
disc?
Some of the MP3 files on a
CD are not recognized.
●
Make sure that the files have correct file
name extensions.
Playback does not
function.
●
Is the disc inserted correctly?
●
Is the disc damaged or deformed?
●
Has the unit been locked with the HOLD switch?
●
Has the unit been moved from a cold place to a
hot place?
Abrupt change of temperature may cause
condensation to form on the lens. Keep your CD
Player in a warm place until the condensation
on the lens has disappeared.
Troubleshooting Guide
Item
Description
*
Frequency range
20Hz ~ 20KHz
*
Earphone output
320mV(RMS), 6.4mW/CH, 16
Ω
*
Signal/noise ratio
90dB (1kHz)
*
Total harmonic distortion
0.08% (1kHz, 0dB)
Format Support
CD-DA (8Cm/12Cm)
CD-ROM Mode 1, Mode 2 Form 1
CD-R/RW Readability
ISO 9660, Joliet, Packet writing, UDF
Romeo, Multi-session
File Support
MPEG 1 Layer 3, WMA, Ogg
Bit Rate
8kbps~320kbps (MP3)
8kbps~192kbps (WMA)
FM Frequency Range
87.50MHz ~ 108.00MHz
FM S/N Ratio
58dB
FM Stereo Separation
30dB
Tag Support
ID3 VI, ID3 V2 2.0~2.4
Power Adapter
DC 4.5V 500mA
Internal Rechargeable Batteries
Two Square-shaped 1350 mAh Ni-MH Batteries
External Batteries
1.5V AA/LR6 type x 2
Dimensions
135.6(W) X 13.9(H) X 135.6(D)
Weight
150g
Specifications
About File Compatibility
●
Only MP3, WMA, and Ogg files with the correct file name extensions
can be played back.
Firmware cannot be
upgraded.
●
The CD door may have been open or power may
have been disconnected during the upgrade.
Burn the upgrade file onto a CD-ROM in ISO
9660 format and perform the upgrade again.
MCD-CM600(GB) 12/4/03 5:21 PM Page 41
