4. Troubleshooting
4.1.7. EDC program
The EDC program can check the machine status and perform various test to isolate the cause of a malfunction.
1) How to use the EDC program
1) Download the EDC program in your PC.
2) Connect the printer to the computer using USB cable.
3) Turn on the printer and wait for the printer to finish initializing.
4) Start EDC program. Press the “Menu” Button
NOTE
Allow 1 second for the printer to process the command from EDC before pressing then next button.
5) To exit the EDC Mode, press the “Exit” button.
EDC mode menu
Code
Displayed Name
Meaning
I/O
Status
100-0000
Main BLDC Motor
Main BLDC Motor is On/Off
Output
On[Off]
100-0010
Main BLDC Motor Ready
Detect if Main BLDC Motor runs at normal
speed
Input
High[Low]
100-0260
SMPS Fan Run
Start/Stop Deve. Fan run
Output
On[Off]
101-0010
T1 Pick-Up Clutch
Engages drive to pick up a paper from tray1.
Output
On[Off]
101-0050
Registration Clutch
Engages drive to registartion rolls.
Output
On[Off]
101-0190
Out-Bin Full Sensor
Detect when a paper is at Out bin full sensor.
Input
High[Low]
102-0010
T1 Paper Empty Sensor
Detect when paper is in Tray1
Input
High[Low]
102-0290
Feed Sensor
Detect when a paper is at Feed sensor.
Input
High[Low]
102-0360
Regi. Sensor
Detect when a paper is at Regi. sensor.
Input
High[Low]
102-0370
Exit Sensor
Detect when a paper is at Exit. sensor.
Input
High[Low]
105-0030
Black MHV Bias
Black MHV bias voltage on at normal drive
level
Output
On[Off]
106-0030
Black Dev Bias
Black Dev bias voltage on at normal drive level
Output
On[Off]
107-0030
Black THV Bias
Black THV bias voltage on at normal drive
level
Output
On[Off]
107-0031
Black THV(-) Bias
Black THV bias voltage on at normal drive
level
Output
On[Off]
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4-18
