10 _ Disassembly and Reassembly
Disassembly
Part
Figure
Description
Assy Panel Control
1. Remove 2 screws holding the Drawer and Panel
using (+) screw driver.
2. Remove the 2 screws at the top of the Assy
Panel Control using (+) screw driver.
3. If you hold the Panel and pull it forward, the
Hook will come off and the Panel will be
separated.
Be careful not to break the Hook.
4. Remove the Connector while pressing the Hook
on the 7 Connectors inserted in the PBA of the
Assy Panel.
5. Remove the Cable Tie that is fixed in two places
as shown in the picture.
