Disassembly and Reassembly _ 39
Disassembly
Part
Figure
Description
Spring & Damper
Before you start, disassemble Assy Cover Top, Assy
Panel Control and Frame Front.
1. Disassemble Frame Plate-Up by removing 4
screws using (+) screw driver.
1. Remove 2 bolts holding damper on both sides
using box driver (13mm).
2. Grab both side of spring and separate the tub
from the frame.
3. Remove spring from the tub.
4. Disassemble 2 Bolts holding the dampers with
box driver (13mm).
When removing the tub from frame, more
than two people are required to work.
