manualshive.com logo in svg

Samsung WW7 T Series, Руководство пользователя

Поделиться
Скачать
Samsung WW7 T Series Скачать руководство пользователя страница 60

English

Troubleshooting

English

60

Code

Action

Addwash door is open

 

(applicable models only)

This message appears when you open the Add Door without pressing Start/
Pause (Hold to Start). If this happens, do one of the following:

• 

Press the Add Door to close properly. Then, press and hold Start/Pause 
(Hold to Start) and try again.

• 

To add laundry, open the Add Door and input laundry. Close the Add Door 
properly. Then, press and hold Start/Pause (Hold to Start) to resume 
operation.

OC

Water has overflowed.

• 

Restart after spinning.

• 

If the information code remains on the display, contact a local Samsung 
service centre.

LC

, 

LC1

Check the drain hose.

• 

Make sure the end of the drain hose is not placed on the floor.

• 

Make sure the drain hose is not clogged.

• 

If the information code remains, contact a customer service centre.

3C

Check the drum motor for operation.

• 

Try restarting the cycle.

• 

If the information code remains, contact a customer service centre.

3CP

The electronic control needs to be checked.

• 

Try restarting the cycle.

• 

If the information code remains, contact a customer service centre.

UC

Check the pulsator motor for operation.

• 

Check if power is supplied properly.

• 

If the information code remains, contact a customer service centre.

Low voltage detected.

• 

Check if the power cord is plugged in.

• 

If the information code remains, contact a customer service centre.

HC

High temperature heating check.

• 

If the information code remains, contact a customer service centre.

1C

The Water Level sensor is not working properly.

• 

Turn the machine off, and restart the cycle.

• 

If the information code remains, contact a customer service centre.

AC

Check communications between main and sub PBAs.

• 

Turn the machine off, and restart the cycle.

• 

If the information code remains, contact a customer service centre.

8C

The MEMS sensor is not working properly.

• 

Turn the machine off, and restart the cycle.

• 

If the information code remains, contact a customer service centre.

U-PJT_WASHER-MD_SimpleUX_DC68-04220A-01_AU_EN(����+�7.5��).indd   60

2020/9/29   13:02:46

Содержание WW7 T Series

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды