English
Troubleshooting
English
58
Problem
Action
Leaks water.
•
Make sure the door is properly closed.
•
Make sure all hose connections are tight.
•
Make sure the end of the drain hose is correctly inserted and secured to the
drain system.
•
Avoid overloading.
•
Use high efficiency (HE) detergent to prevent oversudsing.
•
Check the drain hose.
-
Make sure the end of the drain hose is not placed on the floor.
-
Make sure the drain hose is not clogged.
Has odours.
•
Excessive suds collect in recesses and can cause foul odours.
•
Run cleansing cycles to sanitise periodically.
•
Clean the door seal (diaphragm).
•
Dry the washing machine interior after a cycle has finished.
No bubbles are seen
(Bubble models only).
•
You may not be able to see bubbles if there is too much items in the drum.
•
Severely contaminated laundry may not generate bubbles.
Can I open the AddWash
door at any time?
•
The AddWash door can be opened only when the indicator appears.
However, it does not open in the following cases:
-
When the boiling or drying process is running and the internal
temperature becomes high
-
If you set the Child Lock for safety reasons
-
When the drum wash or drum drying cycle that does not involve
additional laundry is running.
A message appears on
the display to alert that
dispenser is open.
•
Check if the detergent drawer is closed properly.
-
Open the detergent drawer and close it again. Make sure it’s closed
properly.
If a problem persists, contact a service center. The number of the service center is on the label attached to
the product.
U-PJT_WASHER-MD_SimpleUX_DC68-04220A-01_AU_EN(����+�7.5��).indd 58
2020/9/29 13:02:46
