9
ENGLISH
F1
F1
F1
F1
F1
V1
V1(ORG)
F1
F2
F2
F2
F2
F2
V2
V2(YEL)
F2
F1 F2
<Connection between the Wi-Fi Kit to a system without V1 and V2>
• When installing the Wi-Fi Kit, use proper electrical cables considering the size of the wiring hole on
the wall.
• Upon wiring, use the provided U-type terminals (#16-22). When there are no terminals provided or
#24 is used, you can use any U-type terminals that meet the specifications.
• Wi-Fi Kit communication and power cables
-
When installing the Wi-Fi Kit, follow the wiring specifications for the U-type terminal.
-
When installing the Wi-Fi Kit with a 4-wire PVC cable, first peel off the PVC edge (approx. 30 cm).
(AWG22 recommended)
•
U-type terminal specifications for the Wi-Fi Kit PCB
E
d
d2
W
t
F
L
Cable range
Rated
size
Stud
size
Default size (mm)
AWG
mm² mm² mm
t
d
E
F
W
L
24 - 16
0.25
- 1.65
1.5 3 - 3.2
0.6
- 0.8
1.2
- 2.5
4 - 6 5 - 9 5 - 7
12
- 21.2
Max. length for communication/power cables: 50 m
•
Fasten the PCB terminal with fixing screws to a torque of 6 N•cm or less. When you fasten the
screw to a torque over 6 N•cm, it may cause damage to the screw thread.
CAUTION
SOL OCF Wi-Fi KIT 구통신 유럽향 IBIM_EN_DB68-08417A-00_.indd 9
2019-06-21 오후 4:11:43
