Operations
Operations
English
40
Delay End
You can set the washer to finish your wash automatically at a later time by choosing a
delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the
time the wash will finish.
1.
Select a cycle. Then, change the cycle settings if necessary.
2.
Press
Delay End
repeatedly until a desired end time is set.
3.
Press
START/PAUSE
. The
indicator turns on with the clock running.
4.
To cancel
Delay End
, restart the washer by pressing
POWER
.
Real-life case
You want to finish a two-hour cycle 3 hours from now. To do this, you add the Delay End
option to the current cycle with a 3-hour setting, and then press
START/PAUSE
at 2:00 pm.
The washer starts operating at 3:00 pm and ends at 5:00 pm. Provided below is the time
line for this example.
2:00 pm
Set the Delay End to 3 hours
3:00 pm
Start
5:00 pm
End
Steam
With the Steam cycle, the washer senses the weight of the load and controls the steam
effect according to the load size. This improves washing performance.
Available Steam cycles are: NORMAL, HEAVY DUTY, BEDDING, SANITIZE, ALLERGEN, and
DEEP STEAM.
1.
Turn the
Cycle Selector
to select a Steam cycle.
2.
Press
Steam
.
3.
Add detergent and fabric softener as instructed.
4.
Press
START/PAUSE
to start the cycle.
NOTE
• Steam may not be visible or present during the cycle. This is normal.
• Unlike other Steam cycles, you don’t need to press
Steam
for DEEP STEAM as the Steam
function turns on automatically.
WF5500M_DC68-03773A-05_EN.indd 40
3/15/2019 4:54:50 PM
