Samsung WF42H5000A, Руководство пользователя

Страница: 32 / 144

32_English
SeLF CLeAn+
Self Clean+ is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1. Press the power button.
2. Press the self clean+ button.
• Once the Self Clean+ button is pressed, the only
function that can be set is Delay End.
3. Press the start/pause button.
• When you press the Start/Pause button, Self
Clean+ begins.
• Using Self Clean+, you can clean the drum, tub and diaphragm without using a cleansing
agent.
• Never use Self Clean+ when laundry is in the washing machine. It may cause damage to the
laundry or a problem with the washing machine.
• If you want to use a drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer. (When using a
powder-type cleansing agent , remove the liquid detergent
compartment.)
the self clean+ auto indicator function
• If the “ self clean+ ” button is lit after a wash, it indicates
that tub (drum) cleaning is required. In this case, remove
the laundry from the washing machine, turn the power on,
and clean the drum by running Self Clean.
• If you do not run Self Clean+ after every 40 washes, the
“ self clean+ ” indicator turns off after one hour. However,
the “ self clean+ ” indicator will light again after five
washes. Not running Self Clean+ at this point will not cause
a problem with the washing machine.
• Although the Self Clean+ Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.
maintaining your washer
WF42H5000A*
WF42H5100A*
WF42H5200A*
caution
WF42H5000A*
WF42H5100A*
WF42H5200A*
BETTER_WF42H5200-03397A-10_EN.indd 32 2016/8/19 18:12:56