washing a load of laundry
_27
02 W
ASHING A LOAD OF LAUNDR
Y
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1.
Turn on your sink’s water tap.
2.
Press the
Power
button.
3.
Open the door.
4.
Load the articles one at a time loosely into the drum, without overfi lling it.
5.
Close the door.
6.
Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Bedding, Dark
Garment, Daily Wash and Baby Care cycles. It is only necessary if your clothing is heavily
soiled.
7.
Use the
Cycle Selector
to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Eco Drum Clean, Super Eco
Wash, Outdoor Care, Baby Care, Wool, Hand Wash. The relevant indicators will illuminate on
the control panel.
8.
At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9.
Press the
Start/Pause
button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1.
Press the
Start/Pause
button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2.
After closing the door, press the
Start/Pause
button to restart the wash.
When the cycle is fi nished:
After the total cycle has fi nished, the display will show “End” for 5 minutes, and then the
powerturns off automatically.
1.
Open the door.
2.
Remove laundry.
WF1704WS-03042W_EN-01.indd Sec5:27
WF1704WS-03042W_EN-01.indd Sec5:27
2012-04-16 2:27:51
2012-04-16 2:27:51
