1_
Washingaloadoflaundry
WaShINg CLotheS maNuaLLy
You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1.
Turn the water supply on.
.
Turn the Fuzzy Control dial to “Standard” or “Pre-Wash
+
”
.
Open the door.
.
Load the articles one at a time loosely into the drum, without overfilling.
.
Close the door.
.
Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
.
Press the Temperature button to select the temperature.
(cold water, 30˚C, 40˚C, 60˚C, 95˚C)
.
Press to rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is six.
The washing duration will be prolonged accordingly.
.
Press the Spin button to select the spin speed.
The rinse hold program allows you to take clothes that are dripping wet out of the washing
machine.
: No Spin
: Rinse hold
10.
Press the button repeatedly to cycle through the available delayed start options (from 3 hours
to 19 hours in one hour increments). Displayed hours means the time of finished washing-
cycle.
11.
Press the Start/Pause button and the machine will begin the cycle.
uSINg DeLay StaRt
You can set the washing machine to finish your wash automatically at a later time, choosing from 3 to 19
hours delay (in 1 hour increments). Displayed hours means the time of finished washing-cycle.
To do this:
1.
Manually or automatically set your washing machine for the type of clothes you are washing.
.
Press the
delay
button repeatedly until the delay time is set.
.
Press the
start/pause
button. The Delay Start indicator ( )will light, and the clock will
begin counting down until it reaches your finish time.
.
To cancel Delay Start, press the Delay button repeatedly until Delay Start light is turned off ,
or turn the washing machine off. (you can also turn the washing machine off to cancel Delay
Start.)
washing a load of laundry
WF-R126NS_R106NS_02402G_EN.indd 14
2007-01-30 ¿ÀÀü 9:32:34
