❚
Adding another M3 and Hub to a single M3 in use
`
When the M3 in use is connected to the router with a LAN cable
1
Disconnect the LAN cable from the M3 in use.
2
Connect the HUB to the wireless router with the LAN cable, and then plug in the
HUB's power cable.
3
Plug in the power cable of the new M3. The new M3's blue LED pairing indicator starts
to flash. Wait until the pairing indicator on the M3 stops flashing. When the indicator
stops flashing, pairing is complete. The M3 may also beep.
4
Turn off the old M3 by disconnecting the power cable. Then, connect it again.
Press the
SPK ADD
button on the back of the M3. The M3's blue LED pairing
indicator starts to flash. Wait until the pairing indicator on the M3 stops flashing. When
the indicator stops flashing, pairing is complete. The M3 may also beep.
5
On your smart device, select the
Samsung Multiroom
app. Setup starts.
37
44
Содержание WAM350
Страница 62: ... Clock Alarm Lets you set the Alarm Sleep Timer Lets you set the Sleep Timer 62 44 ...
Страница 63: ... Support Device ID Lets you check the Device ID Contact Samsung Provides a link to the Samsung website 63 44 ...
Страница 64: ... Open Source Licenses Lets you view the Open Source Licenses App Version Lets you view the App Version 64 44 ...