troubleshooting
_31
troubleshooting
CHECK THESE SOLUTIONS IF YOUR WASHER…
PROBLEM
SOLUTION
Will not start.
•
Make sure the door is closed.
•
Make sure your Washer is plugged in.
•
Make sure the water source faucets are open.
•
Make sure to press the Start/Pause Button to start your Washer.
•
Make sure Child Lock is not activated. See page 23.
•
Before your Washer starts to fi ll, it will make a series of clicking noises
to check the door lock and do a quick drain.
•
Check the fuse or reset the circuit breaker
Has no water or not enough
water..
•
Turn both faucets on fully.
•
Straighten the water inlet hoses.
•
Disconnect hoses and clean the screens. Hose fi lter screens may be
clogged.
•
Open and close the door, then press the Start/Pause Button.
Has detergent remaining
in the automatic dispenser
after the wash cycle is
complete.
•
Make sure your Washer is running with suffi cient water pressure.
Vibrates or is too noisy.
•
Make sure your Washer is set on a level surface. If the surface is not
level, adjust your Washer feet to level the appliance.
•
Make sure that the shipping bolts are removed.
•
Make sure your Washer is not touching any other object.
•
Make sure the laundry load is balanced.
Stops
•
Plug the power cord into a live electrical outlet.
•
Check the fuse or reset the circuit breaker.
•
Close the door and press the Start/Pause Button to start your
Washer.
For your safety, your Washer will not spin unless the door is closed.
•
Before your Washer starts to fi ll, it will make a series of clicking noises
to check the door lock and do a quick drain.
•
There may be a pause or soak period in the cycle. Wait and it may
start.
•
Check the screens on the inlet hoses at the faucets for obstructions.
Clean the screens periodically.
05 tr
oubleshooting
WA484DSHA-03050D_EN.indd Sec8:31
WA484DSHA-03050D_EN.indd Sec8:31
2012-07-02 3:39:28
2012-07-02 3:39:28
