Disassembly and Reassembly _ 13
Part
Figure
Description
Top Cover/ Door
Switch
1. Remove the 4 screws from the cover
top.
2. Separate the control panel assembly.
3. Separate the water valve, the pressure
switch and the filter EMI housing.
Separate the housing to prevent
stress and damage to the wire-
harness.
4. Separate the main wire harness, the
pressure switch hose clip , Grounding
screw .
5. Separate the top cover assembly by
lifting and pushing ahead the top part of
the assembly.
6. Remove the 2 screws and separate
2 WIRE VINYL.
Sensor Pressure
Switch
1. Disassemble the control panel assembly.
2. Separate the pressure switch housing.
3. Before separating the hose, release the
clip.
When releasing the clip, take care
that you do not tear the hose.
