Samsung WA19J3000A Series, Руководство пользователя

Страница: 28 / 72

English - 28
informAtion codes
The Washer may display information codes to help you understand what is occurring with your Washer better.
code symbol meaning solution
Hot LED Flashes
Lid is open when washer is
running.
Close the lid tightly and restart the cycle. If the
code reappears, call for service.
Warm LED
Flashes
Communication error between
SUB PBA and MAIN PBA.
Call for service.
Cold LED
Flashes
A button is not working properly. Call for service.
Tap Cold LED
Flashes
The Water Level sensor is not
working properly.
When the Tap Cold LED is
flashing, the washer drains for
3 minutes. During this time, the
Power button is inoperative.
Call for service.
Extra Large LED
Flashes
Your Washer has tried to fill but
was unsuccessful.
When the Extra Large LED
is flashing, the washer drains for
3 minutes. During this time, the
Power button is inoperative.
Make sure the water faucets are open all the
way. Check for kinked hoses.
Check the inlet screens on the fill hoses.
If you use a Flood Safety Device, remove the
device and connect the water hoses directly to
the unit.
Check if the hot water supply
hose is connected.
You must connect the hot water supply hose
because hot water is supplied by the Auto
Temperature Control (A.T.C.) function.
Large LED
Flashes
Your Washer has tried to fill but
has not reached the proper water
level.
When the Large LED is
flashing, the washer drains for
3 minutes. During this time, the
Power button is inoperative.
Call for service.
Medium LED
Flashes
A fault is detected in the water
level sensor.
Call for service.
Small LED
Flashes
Your washer is not draining. It can
also mean that the unit senses a
small clog while draining.
Do the following:
1) Turn off the unit and turn it on again.
2) Select only the Spin Cycle.
3) Press the Start/Pause to drain the water.
If it still does not drain, call for service.
Hot & Warm
LEDs flash
Unbalanced load prevented your
Washer from spinning.
Redistribute the load, and then press the Start/
Pause button.
troubleshooting
WA3000J_WA19J3000AW_DC68-03520V_EN.indd 28 2016/11/21 14:10:00