6
1
.
Open the detergent
dissolvent box pulling in the
direction of the arrow, as
shown in the scheme.
2.
Add the proper quantity of
detergent in the box for one
wash to prevent overflow.
HOW TO ADD DETERGENT
• When adding the proper quantity of softener
(one dose) to the softener dispenser, it goes
automatically to the water of the last rinse.
❖
This operation cannot be performed if solely the
hot water is connected.
❖
In there is excess of software accumulated
above the baseline, it may not function properly.
HOW TO ADD SOFTENER
1.
Place a cloth under the filter of the washing machine
to prevent damping the ground.
2.
Turn the filter cap to the left.
3.
Take off the filter and remove the accumulated dirt.
4.
Reassemble reversing the order of the above-
mentioned steps.
HOW TO CLEAN THE FILTER
•
Open the lid of the machine, pour water into the tub
up to the level just below the pulsator, and adjust
the legs so that the pulsator is positioned at the
center of the water as shown in the figure.
•
Place the machine more than 10cm away from the
wall.
•
Adjust the legs on feet for levelling .
SEE IF THE MACHINE IS PLACED LEVEL BY
CHECKING THE POSITION OF THE WASHING TUB.
HOW TO CLEAN THE FILTER NET
1. Pull and tug the
top of the filter.
2. Open the cover as
shown in the figure.
3. Clean the filter.
4. Close the cover and insert the bottom of
the filter first in the basked and then push
the filter until hearing the sound of knock.
ONE-TOUCH ADJUSTABLE LEGS
1.
Pull the control handle of
the adjustable leg
frontward and push aside,
which is located on the
right and left side in the
front.
2.
Adjust height.
3.
Following the adjustment,
pull once more the control
handle frontward and fix
the adjustable leg.
WA1346D0-GB-01665D 2/18/03 10:34 AM Page 6
