Samsung WA-7000HA PJT Скачать руководство пользователя страница 7

Страница: 7 / 37

Features and Specifications _ 5

2. feATuReS AND SPeCIfICATIoNS

2-1. feATuReS

features

Description

The Great Capacity

• Even bulky garments and blankets get super clean. The Great capacity

leaves enough room for a more thorough, cleaner wash.

AquaJet

• AquaJet™ washes loads gently and more thoroughly than conventional top

loaders. Sprayed water allows detergent to distribute evenly and penetrate

fabrics faster and deeper. AquaJet™ delivers improved cleanliness and

advanced fabric care.

DD Motor

• The power to handle anything! Our direct-drive inverter motor delivers power

right to the washer tub from a variable speed, reversible motor. Beltless

direct-drive motor generates a higher spin speed for more effective, quiet

operation. The washer also has fewer moving parts, meaning fewer repairs.

Mist Shower

• A separate nozzle has been adopted that sprays water equally so that the

rinse cycle is effective even with a small amount of water.

VRT

(Vibration Reduction Technology)

• This Samsung washer performs smoothly at top spin speeds, minimizing

noise and vibration.

Eco Plus

• If you select this option, the water temperature is set to slightly lower than

during the normal wash course to save energy.

Self Clean

(Tub Cleaning cycle)

• Clean your drum with one button! This Pure Cycle is specially designed to

remove detergent residue & dirt bulid up in the tub, without the need for

special chemical detergents.

EZ-Closed Lid

• The door is designed to close softly and prevent users from being injured

My Cycle

• This is a convenient function that enables you to save a frequently-used

wash course. Once this is set, you can do a wash simply by pressing the

Power, My Cycle and Start buttons in this sequence.

Smart Care

• Samsung’s Smart Care, an automatic Check-monitoring system, detects and

diagnoses problems at an early stage and provides quick and easy solutions.

Prewash

(Water Jet & Built-in sink)

• Water Jet and Built-in sink help you handwash before the washing machine
starts operation. Water Jet is available only when the door is open with the

water level set to less than High. For prewashing, use the Built-in sink that is

designed to facilitate the hand-wash.

Содержание WA-7000HA PJT






































Результаты поиска

Содержание WA-7000HA PJT

Отзывы:

Бренды по названию

Популярные бренды

Samsung WA-7000HA PJT, Руководство по обслуживанию

Результаты поиска

Содержание WA-7000HA PJT

Отзывы:

Бренды по названию

Популярные бренды