2
English
English
3
Caution
• Before using Mopping Robot, please clear the area and remove any objects that may
impede or block the cleaning process.
• Do not soak Mopping Robot in water or spray oil on it.
• Do not use Mopping Robot on a table or other high places.
• Mopping Robot may not be able to see objects that are below its sensors.
This may impact its ability to detect stair edges or other steep drops.
•
Remove and allow mop pads to dry after use. Do not leave wet mops on floors for an
extended period of time, as you risk damaging your floors.
• Make sure that children or pets do not step or sit on the robot cleaner while operating.
• Mopping Robot is designed for indoor usage.
• Power off Mopping Robot whenever you are switching cleaning pads or adding water
to the mop kits.
• Make sure the sensor windows are clean and obstruction free prior to use.
•
Make sure the water supply mop kit is filled with water and assembles to Mopping
Robot before use.
•
Do not use Mopping Robot on the black coloured floors.
−
Mopping Robot may not be able to operate normally.
• The cliff detection sensor may not detect a height difference less than 50 mm, and
therefore the product may fall. Be cautious when using the product.
Note
•
Do not use the robot cleaner on a floor with a slope greater than 10°.
• Make sure the Mopping Robot battery is fully charged before each use.
•
Remove obstacles (chair, etc.) for quick and thorough cleaning.
• After using the water supply mop kit and wet mop, clean them thoroughly.
•
If Mopping Robot equipped wet mops are put on the floor plate for long time, the
mops may be contaminated.
•
Remove the protective film from the product before use.
How to use Mopping Robot
VR6000TM_QG_Mopping-Robot_ST_EN.indd 3
2020-08-18 9:09:39
