Samsung VP-M50, Инструкция для владельца

Страница: 19 / 63

Setting-up the Camcorder
To use Battery Pack
ENGLISH
How long will the battery last for shooting?
✤
It depends how often it’s used in STANDBY mode.
✤
How often zoom lens are used in shooting. Prepare as many battery packs as possible.
Recharging the Battery Pack
1. Attach the battery pack to the camcorder.
2. Connect the AC Power Adapter to a AC cord and
Connect the AC cord to a wall socket.
3. Connect DC cable to DC jack of the camcorder.
4. Turn off the power of camcorder, and the recharg-
ing indicator will start blinking and begin recharging.
-
Blinking once a second : Indicates less than
50% has been charged.
- Blinking twice a second : Indicates 50% ~ 75%
has been recharged.
- Blinking three times a second : Indicates 75% ~ 100% has been recharged.
- Blinking stops and stays on : Recharging has been completed.
- On for a second and off for a second : Indicates there are some error.
Reset the battery pack and DC cable.
5. If recharging is completed, separate the camcorder, AC power adapter, and battery pack.
- Even if the power is turned off, battery will be discharged.
Note: Battery pack may be charged a little at the time of purchase.
1
4
2 3
OFF
19