Samsung VP-M50, Инструкция для владельца

Страница: 18 / 63

Setting-up the Camcorder
Connecting the Power Source
18
ENGLISH
✤
There are two ways to connect power source.
-
Using the AC Power Adapter : used for indoor shooting.
- Using the Battery Pack: used for outdoor shooting.
To use AC Power Adapter
1. Connect the AC Power Adapter to a AC cord.
2. Connect the AC cord to a wall socket.
Note: The plug and wall socket type can be different
according to the regional conditions.
3. Connect the other end of the DC cable to DC jack of
the camcorder.
4. To set the camcorder to CAMERA mode.
a. Hold down the tab of the power switch and push the switch
to CAMERA mode.
b. Set LOCK/STANDBY switch to STANDBY mode.
c.
Make sure that the Lens Cap is opened.
d. Make sure that the image appears in the Viewfinder.
Note: If the adapter is used next to the TV or the camcorder,
it may cause the TV or camcorder to emit noise.
Move the adapter away from the TV, camcorder or
the antenna cable.
1
2
3
4-a
4-b
CAMERA
STANDBY