126
126
ENGLISH
Troubleshooting
Symptom
Possible Causes
Measure
Focus does not adjust
automatically
The Memory Card will
not load properly
Colour balance of picture
is not natural
Digital zoom does not
work
Files stored in the
Memory Card cannot be
deleted
Images on the LCD
monitor appear dark
Rear of the LCD monitor
is hot
Play, rewind and fast
forwarding do not work
Memory Card cannot be
played back (Photo mode)
No picture is taken when
is fully pressed
Built-in Light will fire
Cannot Record a video
LCD monitor turns off
Focus is set to manual mode
Recording was done in a
dark place
Lens is covered with
condensation
The Memory Card is in wrong
position
Something fills in the MUILTI
CARD slot
White balance adjustment is
required
The effect(Digital special
effect) is applied
Memory Card is protected
File is locked
Ambient is too bright
Ambient temperature is too
low
Prolonged use of LCD
monitor
The Photo Mode is selected
The Video Mode is selected
Not enough free memory
space is remained
Memory Card is formatted by
different devices
Light is forced to cancel
Light is not available for
recording
The ‘Photo Mode’ is selected
To save power consumption,
the LCD monitor and CAM's
power turns off if there is no
button operation for a certain
period of time (depending on
operation mode), which is not
a malfunctioning
Set focus to AUTO
Use strobe or lit the place
Clear the lens and check the focus
Insert the Memory Card properly, page 33
Clear the MUILTI CARD slot
Set proper white balance, page 69
Turn off the effect(Digital special effect),
page 54
Remove the protection tab of Memory Card
(except MMC)
Remove the lock on the file, page 86
Adjust the brightness and angle of LCD
Low temperatures might produce a dark
LCD display
This is not a malfunction
Close the LCD monitor to turn if off,
or turn your device off to cool down
Select ‘Video Mode’ and select ‘Play’
Select ‘Photo Mode’ and select ‘View’
Delete files from the Memory Card
Format the Memory Card on the CAM
Select different Flash mode, page 67
Select ‘Video Mode’
Operating any button will turn the CAM on
Pressing the button once again will operate
its function
LCD
LCD
LCD
MULTI CARD
LCD
Photo Mode
LCD
AUTO
33
MULTI CARD
69
54
MMC
86
LCD
LCD
LCD
Video Mode
Play
Photo Mode
View
67
Video Mode