Samsung VP-D371, Руководство по обслуживанию

Страница: 14 / 212

3-2
Alignment and Adjustments
Samsung Electronics
[STEP 2]
Œ
Press and hold the "OK" and "DISPLAY" buttons on the video camera at the same time for more
than 5 seconds.
´
When monitor OSD appears as shown Fig. 2-2, the adjustment mode has been activated successfully.
ˇ
Press the W( )T( ) button, to highlight VCRADJ and push the "OK Button".
¨
Monitor OSD shows Fig. 3-3.
Then VCR adjustment mode has been activated successfully.
[STEP 3]
If you want to finish the adjustment mode, you have to do Power Reset.
The Power Reset means that you pull out the power source and pull in it again.
Fig. 3-2
Fig. 3-3
3-1-2 VCR Adjustment
Œ
Get into VCR ADJUST mode.
´
Move to the VCR ADJUST address “858”.
ˇ
Play standard tape, and “Head Switching Position” will be adjusted automatically.
Mode(Address) Name Value Description
858 SWP Position 80 Head Switching Position Adjust
<Table 3-2>
Note : This is the only electronic adjustment for the VCR.
Other addresses have already been assigned data during the manufacturing process.
We don’t need any adjustment for those addresses.