ENGLISH
16
16
Preparation
Using the Lithium Ion Battery Pack
✤
Use SB-LSM80 or SB-LSM160 Battery Pack only.
✤
The Battery Pack may be charged a little at the time of purchase.
Charging the Lithium Ion Battery Pack
1. Turn the
[Power]
switch to
[Off]
.
2. Attach the Battery Pack to the Camcorder.
3. Connect the AC Power adapter (AA-E9 TYPE) to a wall
socket.
4. Connect the DC cable to the DC jack on the
Camcorder. The charging indicator will start to blink,
showing that the Battery is charging.
5. Press and hold the DISPLAY button while charging and the charging status will be
displayed on the LCD for 7 seconds.
■
As indicated the battery level is given as reference data for the user, it is the
approximate estimation. It may differ from Battery capacity and temperature.
6. When the Battery is fully charged, disconnect the Battery Pack and the AC Power Adapter
from the Camcorder.
Even with the Power switched Off, the Battery Pack will still discharge.
Charging, Recording Times based on
Model and Battery Type.
✤
If you close the LCD Screen, it switches off and
the Viewfinder switches on automatically.
✤
The continuous recording times given in the table
to the right are approximations.
Actual recording time depends on usage.
✤
The continuous recording times in the operating
instructions are measured using a fully charged Battery Pack at 77 °F (25 °C).
✤
Even when the Power switched Off, the Battery Pack will still discharge if it is left attached to the device.
Blinking time
Charging rate
Once per second
Less than 50%
Twice per second
50% ~ 75%
Three times per second
75% ~ 90%
Blinking stops and stays on
90% ~ 100%
On for a second and
Error - Reset the Battery Pack and
off for a second
the DC Cable
Battery
SB-LSM80
SB-LSM160
(Option)
Charging
time
Approx.
1hr 20min
Approx.
3hr
LCD On
Viewfinder On
Recording time
Time
Approx.
1hr 20min
Approx.
2hr 40min
Approx.
1hr 30min
Approx.
3hr
Battery Info
B
Ba
atttte
erryy cch
ha
arrg
ge
ed
d
0%
50%
100%