Samsung VP-D30, Руководство по обслуживанию

Страница: 57 / 74

Samsung Electronics
1-1
1. VCR Adjustment
Fig. 1-1
1-1 VCR Adjustment Preparation
1) How to get into the VCR adjust mode
STEP 1
ΠConnect the power source.
´ Set the power switch to “TAPE” position.
STEP 2
ΠPress and hold the "STOP" and "PB ZOOM"
buttons on the video camera at the same time
for more than 5 seconds.
´ When monitor OSD appears as shown Fig. 1-2, the
adjustment mode has been activated successfully.
ˇ Move the “MENU Selector” to highlight VCR ADJ
and push the “MENU Selector”. (See Fig. 1-3)
¨ When changing the adjustment item, please press
the “EASY” and “DISPLAY” buttons on the video
camera.
ˆ
You can change the adjustment value to move the
“MENU Selector” Up or Down.
Ø After setting adjustment value, please push the
“MENU Selector” to confirm Data.
STEP 3
If you want to finish the adjustment mode, you have
to do Power Reset.
The Power Reset means that you pull out the power
source and pull in it again.
EASY Button
DISPLAY Button
PB ZOOM Button
STOP Button
MENU Selector
Fig. 1-2
ADJ ITEM
VCR ADJ
CAM ADJ
CODEC ADJ
PRML ADJ
CAM DISP
DSC ADJ
LCD/CVF ADJ
SP
- : - - : - - : -
VCRADJ EPR
430 FF
EVR
FF
Indicates current adjustment item
Indicates the adjusted values
Indicates preset values
Fig. 1-3