PROBLEM
CAUSE
REMEDY
0
- IF YOU HAVE A PROBLEM
Motor does not start.
No power supply.
Thermal cut-out.
Check cable, plug and socket.
Leave to cool.
Suction force is gradually
decreasing.
Nozzle, suction hose or tube
is blocked.
Check for blockage and
remove it.
Cord does not rewind fully.
Check that the cord is not
twisted or wound unevenly.
Pull the cord out 2-3m and
push the cord rewind button.
Vacuum cleaner does not
pick up dirt.
Crack or hole in hose.
Check hose and replace if
required.
Low or decreasing suction
Filter is full of dust.
Please check filter and, if
necessary, clean as illustrat-
ed in the instructions.
7
CHANGE THE BATTERY(OPTIONAL)
WARNING
1. Never disassemble or recharge the batteries.
2. Never heat up the batteries or throw them into fire.
3. Do not reverse (+),(-) poles.
4. Dispose of the batteries properly.
NOTE
1. When the vacuum cleaner does not work, replace the batteries.
If the problem persists, please contact our authorized dealer.
2. Use 2 batteries of size AAA.
BATTERY TYPE : AAA Size
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Safety Directive : 2006/95/EC
EN-10
DJ68-00369F(0.4)-EN2 5/30/08 4:42 PM Page 11
