7
This Vacuum cleaner is approved the following
EMC Directive : 89/336/EEC, 92/31EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
USAGE OF FLOOR NOZZLE
Select the carpet indicator
➀
when cleaning carpets.
Select flat surface indicator
➁
when cleaning the floors, tiles, etc.
FOR RUG / FLOOR SELECTOR
Before use make sure that the position of the selector
is in the right position for the type of surface to be
cleaned.
FOR UNIVERSAL BRUSH
Use the floor nozzle for cleaning all surfaces.
NOTE:
For optimum efficiency, clean floor brush
with crevice tool.
OUTLET FILTER
▼
NOTE:
The filters must be completely dried before being replaced in the dust compartment.
1) Open the grille part, separate the
exhausted filter.
2) Reassemble it after cleaning or replacing
the filter in the reverse order.
TROUBLE SHOOTING
Motor does not start.
No power supply.
Check cable, plug and
socket.
Suction force is gradually
Filter, nozzle, suction hose
Remove the object.
decreasing.
or tube is blocked.
Cord does not rewind fully.
Check that the cord is not
Pull the cord out 2~3m &
twisted or wound unevenly.
push down the cord rewind
button.
PROBLEM
CAUSE
REMEDY
CODE NO : DJ68-00068A REV(0.2)
DJ68-00068A(0.2) 2/20/04 3:30 PM Page 8
