REPLACING THE DUST BAG
1) To open the dust cover of the dust bag com-
partment, press the clamper upwards.(The
clamper is located at the front of the dust cover)
2) Remove the dust bag from the cleaner.
FOR CLOTH FILTER BAG
MAINTENANCE OR REPLACEMENT OF THE FILTERS
INLET FILTER
To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust
compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage may
result. After cleaning the secondary filter attach it in place.
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
▲
SECONDARY FILTER
SECONDARY FILTER
OUTLET FILTER
▼
NOTE:
The filters must be completely dried before being replaced in the dust compartment.
1) Open the grille part, separate the
exhausted filter.
2) Reassemble it after cleaning or replacing
the filter in the reverse order.
3) After removing the used dust bag, insert the
cardboard bag collar of the new dust bag into
its original position.
4) Press the dust cover down gently until the
clamper relocks.
6
EN
DJ68-00094T(EN+ES) 1/20/04 10:32 AM Page 7
Содержание VC-5853
Страница 16: ...DJ68 00094T REV 0 0 ...