Samsung UN75ES9000F, Руководство по обслуживанию, Страница: 39 / 114

Problem Solution
Judder / Blur is seen on TV. With Auto Motion Plus, you can see more clear image without blur and judder, but there
•
are some side-effect. So, It is available to choose Auto Motion Plus 120Hz mode (Off/
Clear/Standard/Smooth/Custom/Demo). Using custom mode, you can set level(0~10) of
'Judder reduction' and 'Blur reduction' finely. You choose 10, the highest performance of
Auto Motino Plus is working.
Even though I set the 'Auto
Motion Plus 120' on, display
@60Hz in information OSD.
Displayed frequency in information OSD is information of input source, not of output
•
image Samsung 120Hz model display always 120Hz picture. The method of 'Frequency
Rate Conversion'(FRC) is different according to Auto Motion Plus option you select.
does not work.
Check if the device is an device. The system supports devices
•
only.
Only one receiver (home theater) can be connected.
•
Check if the device power cord is properly connected.
•
Check the device’s Video/Audio/HDMI cable connections.
•
Check whether (HDMI-CEC) is set to On in the setup menu.
•
Check whether the TV remote control is in TV mode.
•
Check whether the remote control is compatible.
•
doesn’t work in certain situations. (Searching channels, operating Smart Hub or
•
Plug & Play (initial setup), etc.)
When connecting or removing the HDMI cable, please make sure to search devices again
•
or turn your TV off and on again.
Check if the Function of device is set on.
•
I want to start .
Check if the device is properly connected to the TV and check if the
•
(HDMI-CEC) is set to On in the Setup menu.
Press the TOOLS button to display the menu and select a menu you want.
•
I want to exit . Select View TV in the menu.
•
Press the SOURCE button on the TV remote control and select a non- device.
•
Press z and PRE-CH to change the TV mode. (Note that the channel button operates
•
only when a tuner-embedded device is not connected.)
The message “Connecting to
device...” appears on
the screen.
You cannot use the remote control when you are configuring or switching to a
•
view mode.
Use the remote control when the setting or switching to view mode is complete.
•
The device does not
play.
You cannot use the play function when Plug & Play (initial setup) is in progress.
•
The connected device is not
displayed.
Check whether or not the device supports functions.
•
Check whether or not the HDMI cable is properly connected.
•
Check whether (HDMI-CEC) is set to On in the setup menu.
•
Search devices again.
•
You can connect an device using the HDMI cable only. Some HDMI cables may
•
not support functions.
If connection is terminated because there has been a power interruption or the HDMI
•
cable has been disconnected, please repeat the device scan.
The TV Program cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.
•
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
•
AllShare
TM
Deleted phone number appear in
device list again.
Because rebooting or trying to access of deleted device.
•
Move to Message menu, select registed device and set 'denied'. -
I find over two same TV names. You can change your TV name in 'Home Network Center - Menu'.
•
Unkown phone number's
Message or Media arrived.
Move to Message menu, Unkown device set 'denied'.
•
OSD of message is small. OSD of message is small except for TV mode.
•
4-8
4. Troubleshooting