English - 29
Because
Motion Control
works with the built-in camera on top of the Smart TV, it is important that you are
within the sightline of the TV Camera and nothing is obstructing its view of you. If the TV Camera is facing
too high, or too low, you can adjust it using the dial on the back of the TV.
Motion Control
works best in a
well lit room. For best results, be sure the light in the room is illuminating the front of you. The TV Camera is
looking for movement, so there should be contrast between you and the background. Before using
Motion
Control
recommended to run a
Motion Control Environment Test
(as described below) which measures
the ambient light in the room, and ensures the built-in TV Camera is able to see you. (
System
→
Voice
and Motion Control
→
Motion Control
→
Motion Control Environment Test
).
■
Motion Control
Turns the
Motion Control
function on or off.
■
Motion Guide Bar Size
Sets the
Motion Guide Bar Size
mode between
Minimum
or
Full
.
■
Motion Control Environment Test
Brightness Test
: In order for Motion Controls to work there must be sufficient light in the room. The
Brightness Test
measures the ambient light in the room. Stand or sit no more than 13 feet away from
your TV and select the start option. The
Brightness Test
will begin and should take about 10 seconds.
If there is not sufficient light in the room you will get a prompt that reads Brightness Test failed. This
means that it is too dark for
Motion Control
to see your movements. It is suggested that you increase
the brightness in your room. Also, check the angle of the camera to be sure it is facing out at you.
Rotate the camera angle dial located on the back of the camera. After checking these things, select
retest. If there is enough light in the room the prompt will read Brightness Test complete. This means
there is enough light in the room for Motion Controls to work properly. (Appropriate ambient brightness:
50 – 500 Lux)
✎
Avoid positioning the TV Camera directly into sunlight or any other illuminating light source.
Camera Angle Test
: This will help determine whether the TV Camera can see you in order to use
Motion Control
. Stand or sit in front of your TV so that you can see yourself in the rectangle on the
screen. If the camera is facing too high, or too low you can adjust it using the camera angle dial located
on the back of the camera. Now, with your TV remote in one hand, select
Start
. With your other hand,
wave slowly left to right at the TV. Be sure your hand is flat and your palm is facing directly at the TV.
Wave your entire hand and arm in a deliberate manner, and not simply a flicking of the wrist. This is the
best way for the TV to recognize your hand. When the Camera Angle test is complete, a cursor will
appear on the screen.
Motion Control
is now enabled and configured on your Samsung Smart TV.
To disable
Motion Control
, open the
Motion Control
Menu, select
Motion Control
and choose
Off
.
[UE9000-ZC]BN68-04533B-00L02.indb 29
2012-07-25 �� 10:51:21
