Samsung UN43TU8000F, Руководство по обслуживанию

Страница: 45 / 165

4-1-2. FUNCTION/IR Control Test of Function/Wi-Fi /BT Module
Function/Wi-Fi/BT
Connector
LED Status/ Function
Switch
< Function/Wi-Fi/BT Connector Pins with Main
Reference Chart>
1 2 3 4 5 6 7 8 9 10 11 12 12 14 15 16 17 18 19 20
1 3 5 7 9 2 4 6 8 10 11 13 15 17 19 12 14 16 18 20
Wi-Fi /BT Pins Function Pins
Function Pins
1 USB DM 11 KEY1
2 USB DP 12 KEY2
3 GND 13 I2C_SCL
4 UART_TX 14 I2C_SDA
5 BT_WAKLE_UP 15 DMIC_DATA
6 WIFI_SUSPEND 16 DMIC_CLK
7 5V 17 LED
8 WIFI_WAKE_UP 18 GND
9 RESET 19 IR_LED1
10 IR_RX 20 IR_LED2
<WCT733M Pin Assignments>
1. Place TV in Power Standby
2. Check LED Status
3. If LED is OFF
9
Check LED (pin 17 ) and VCC for 5Vdc (pin 7 )
→
If missing suspect Function Assy/Cable/Main board.
4. If LED is ON
9
Check Switch Operation activates on screen display
[On Screen Selections with Function Control]
• If missing:
9
Check KEY_INPUT1 (pin 11 ) change to 0V with a command.
• If wrong voltage or no change:
9
Check Switch for stuck or miss-operation.
5. Check IR (pin 10 ) operation with Standard Remote command changes. (5V to 3.3V effective DC)
6. Check SDA (pin 14 ), SCL (pin 13 ) for effective 5Vdc (after power on)
→
If missing suspect Function Assy/Cable Assy/Main Assy.
4-2
4. Troubleshooting