English - 11
3
b
Wired Network
The TV checks the network connection, then displays the “Wired network and Internet
connection complete” message appears and highlights
Next
. Press
ENTER
E
.
4
Software Update
:
Upgrade the software
to the latest version.
On the
Software Update
screen, press the
ENTER
E
button to upgrade the TV’s
software. If new software is available, the player downloads and installs the new
software. When the download is complete, select
Next
, and then press
ENTER
E
.
✎
To upgrade later, select
Skip
, and then press
ENTER
E
. For more information,
see “
Software Update
” in the
e-Manual
.
✎
You can only upgrade software if your TV has an active network connection.
✎
If no update software is available, the
Auto Program
screen appears
automatically.
5
Auto Program
(1):
Select where your TV
signal comes from.
Press the
▲
or
▼
button to select the correct option, and then press
ENTER
E
twice.
Let’s find and store channels on your TV. Do you need to search for channels?
y
Yes, I need to.
: Select if you have an antenna or a cable connection without a set-
top-box, and then go to
Auto Program (2)
below.
y
No, I don’t need to.
: Select if you have a satellite or cable set-top-box. You do not
need to run
Auto Program
. Select
Next
or
Skip
, and then go to
6 Clock - Manual
below.
6
Auto Program
(2):
Select the search
options
1.
Press
ENTER
E
. The
Air/Cable
screen appears.
2.
Press the
▲
or
▼
button to select
Air
or
Cable
, and then press
ENTER
E
. A
check appears next to your selection. Select
Next
, and then press
ENTER
E
. You
can check both if you have both connected.
3.
If you selected
Air
, channel memorization starts. Go to
5 Auto Program (3)
. If you
selected
Cable
, you’ll go to the Cable System screen. Use the
▲
or
▼
button to
select
Digital Cable System
, and then press
ENTER
E
. Use the
▲
or
▼
button
to select the correct cable signal format -
STD
,
HRC
, or
IRC
- and then press
ENTER
E
. Most cable systems use
STD
. Repeat the same process for
Analog
Cable System
.
4.
When done, select
Next
, and then press
ENTER
E
.
7
Auto Program
(3):
Channel memorization
Channel memorization starts. Channel memorization can take up to 45 minutes.
When channel memorization is complete, the Channels Memorized screen appears.
Press
ENTER
E
. The
Clock
screen appears.
✎
You can press
ENTER
E
at any time to halt the memorization process.
8
Clock
: Set the Clock
Press the
▲
or
▼
button to select
Auto
or
Manual
, and then press
ENTER
E
twice.
Auto
If you selected
Auto
, you’ll go to the
Time Zone
screen, and then the
DST
screen. On
the
Time Zone
screen, use the
▲
or
▼
button to select your time zone, and then press
ENTER
E
twice. On the
DST
screen, select whether to turn DST (Daylight Savings
Time)
On
or
Off
, and then press
ENTER
E
. When done, press
ENTER
E
.
Manual
If you selected
Manual
, select
Date
, and then press
ENTER
E
. Use the number
buttons or the
▲
or
▼
button to set the date. Use the
◄
or
►
button to move between
entry fields. When done, press
ENTER
E
. Select
Time
, and then press
ENTER
E
.
Set the time in the same fashion. When done, press
ENTER
E
. Then, select
Next
, and
then press
ENTER
E
. The
Setup
Complete
screen appears.
9
Setup Complete
Review the Setup data, and then press the
ENTER
E
button.
If You Want to Re-run Setup...
O
MENU
→
System
→
Setup
→
ENTER
E
If You Want to Turn the Store Demo Mode On or Off.
To set or unset
Store Demo
mode outside of Setup, press and release the Controller when the power is on. The Function
menu screen appears. Push the Controller to the left (to
MENU
(
m
)) and hold for more than 5 seconds. The
Store Demo
mode is set. To cancel
Store Demo
, bring up the Function menu using the Controller, push the Controller to the right (to
Source
(
s
) and hold for more than 5 seconds. See page 13 for information about the Controller.
[UE6030-6070-ZC]BN68-04458D.indb 11
2012-05-21 �� 11:06:45
