- 6 -
■
■
Information
: Display the information for a show or channel you
have scheduled. You can also change the schedule Information.
1. Select the
Programmed
List icon on the left side of the
Channel List
screen, and then press the
ENTER
E
button.
2. On the
Programmed
List screen, select the show or channel
entry you want information for, and then press the
TOOLS
button. The Tools Menu appears.
3. Select
Information
, and then press the
ENTER
E
button.
The
Time Viewing
Information screen appears.
4. Select
Change Info
and press the
ENTER
E
button
to change information, or select
Close
and press the
ENTER
E
button to close the Information screen.
■
■
Select All / Deselect All
: You can select or deselect all
channels in the channel list.
❑
Other Channel Menu Functions
Channel Mode (Added Channels/Favorite
Channels)
Lets you select the channel list displayed when you press the
<
CH
>
(Channel) button on your remote. For example, if you
select Favorite Channels, you will only see Favorite channels when
you press the
<
CH
>
button.
Fine Tune
Analog channels only.
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel
manually.
✎
Select the channel, and then select
Fine Tune
.
✎
Fine tuned channels that have been saved are marked with
an asterisk “*” on the right-hand side of the channel number
in the channel banner.
✎
To reset fine-tuning, select the channel, select
Fine Tune
, and
then select
Reset
on the
Fine Tune
screen.
Setup Menu
Plug & Play
Lets you re-run the
Plug & Play
initial setup procedure. For
instructions, see your Quick Start Guide.
Language
Set the menu language.
✎
Choose between
English
,
Español,
and
Français
.
❑
Setting the Time
Time
✎
The time you set will appear when you press the
INFO
button.
■
■
Clock
: Set the clock so you can use the various timer features
of the TV.
✎
If you disconnect the power cord, you have to set the
clock again.
To set the clock, follow these steps
:
1. Select
Setup
>
Time
>
Clock
.
2. Press
ENTER
E
and select
Auto
or
Manual
, and then press
ENTER
E
again.
If you selected Auto:
The TV will automatically download the correct time from a
digital channel.
• Select
Time Zone
, and then press the
ENTER
E
button.
Use the
▲/▼
buttons to select your
Time Zone
, and then
press
ENTER
E
.
• Select DST (Daylight Savings Time), and then press
ENTER
E
. Select
On
if you want to turn the DST
adjustment on and off manually. Select
Off
to turn off the
DST adjustment. Select
Auto
if you want the TV to adjust
to DST automatically. Press
ENTER
E
when done.
✎
DST
and
Time Zone
function are only available when
the
Clock Mode
is set to
Auto
.
If you selected Manual:
The
Clock Set
screen appears. Use the
▲/▼
buttons to
change the values in each field or use the number buttons to
enter the values directly. Use the
◄/►
buttons to move from
field to field. When done with all the fields, press
ENTER
E
.
✎
Available only when
Clock Mode
is set to
Manual
.
■
■
Sleep Timer
t
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
✎
To cancel the
Sleep Timer
, select
Off
.
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you
select. You can set three different on/off timer settings.
✎
You must set the clock first.
■
■
On Time / Off Time
: Set the hour, minute, am/pm, and
Activate/Inactivate fields for the
On Time
and
Off Time
. Use the
◄/►
buttons to move from field to field. Use the
▲/▼
buttons
to change the values in each field. To activate the timer with
the setting you have chosen, set the Activate/Inactivate field to
Activate
.
■
■
Volume
: Set the desired loudness.
■
■
Contents
: To select what will be turned on when the timer
setting is activated. You can set the TV to turn on a specific
channel or play back contents such as photo or audio files.
Use the
◄/►
buttons to move to move to the Contents field,
and then press the
ENTER
E
button. The Contents screen
appears. Use the
◄/►
buttons to move from field to field. Use
the
▲/▼
buttons to change the values in each field.
- TV/USB
: Select
TV
or
USB
. The USB device must be
connected to your TV before you can select USB.
- Antenna
: Displays the current antenna source,
Air
or
Cable
.
- Channel
: If you have selected TV, select the desired channel.
- Music/Photo
: If you have selected USB, follow these steps to
select a folder containing MP3 (Music) or JPEG (Photo) files on
the USB device:
✎
The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
✎
The media may not be playing smoothly when using the
device lower than USB 2.0.
1. Use the
◄/►
buttons to move to the field under
Music
or the field under
Photo
, and then press the
ENTER
E
button. The TV displays a single folder (the Root folder)
and the type or name of the device.
