English - 12
4
Software Upgrade
: Upgrading
the software to latest version
✎
To upgrade later, select
Skip
.
Select
Next
to upgrade TV software. Your TV will automatically upgrade, if your TV need a software
upgrade. If you want to upgrade later, select the
Skip
. For more information, refer to
Software
Upgrade
(Preference Features
→
Support Menu) in the e-Manual.
✎
This may take some time, depending on network status.
5
Select Country.
(Depending on the country)
Select the appropriate country.
✎
After selecting the country in the Country menu, some models may proceed with an
additional option to setup the pin number.
6
Auto Tuning
(1): Selecting how
you watch your TV
Let’s find and store channels on your TV. Do you need to search for channels?
•
Yes, I need to.
: All the channels available will be found and stored on your TV.
•
No, I don’t need to.
: My set-top box provides all the channels that are available, so I don't
need to search for channels.
7
Auto Tuning
(2):
Selecting a search options and
Region Selection
(Depending
on the country)
Select the channel source to memorise. When setting the aerial source to
Cable
, a step appears
allowing you to assign numerical values (channel frequencies) to the channels. For more information,
refer to
Auto Tuning
(Channel Menu
→
Memorizing Channels) in the e-Manual.
✎
When
Air
or
Cable
is selected first: After all
Air
or
Cable
channels are stored, the step for
storing
Satellite
channels is displayed.
✎
When
Satellite
is selected first: After all
Satellite
channels are stored, the step for storing
Air
or
Cable
channels is displayed.
✎
Select
Stop
at any time to interrupt the memorization process.
8
Clock
: Setting the Clock Mode
•
Auto
: Set the current time automatically.
•
Manual
: Allows you to manually set the current date and time.
9
Voice and motion control
:
Setting the Voice and motion
control function.
✎
You can turn the
Voice and motion control
function
On
or
Off
. Select Off or On, and then
select
Next
. For more detailed information, refer to “SMART Interaction” (p.14)
10
Setup
Complete
Select
Close
to finish.
✎
The completed settings are displayed.
11
Set the Universal Remote
1.
Turn on the
POWER
button on the bottom of the IR Blaster, and then press the
PAIRING
button.
2.
Select
Yes
to start the Universal Remote Setup.
✎
For more detailed information about the Universal Remote Setup, refer to "Setting up the
Universal Remote Control" section in the manual (page 9).
If You Want to Reset This Feature...
Menu
→
System
→
Setup
Select
System
-
Setup
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN number, use
the
Change PIN
function.
You should do
Setup
(
Menu
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER
(on).
[UE9000-ZG]BN68-04584A-01L04.indb 12
2012-09-05 �� 2:04:26
