English - 11
English
Installing batteries (Battery size: AAA)
Match the polarity of the batteries to the symbols in the battery compartment.
1
3
2
✎
NOTE
•
Install the batteries so that the polarity of the batteries (+/-) matches the illustration in the battery compartment.
•
Use the remote control within 23 feet of the TV.
•
Bright light may affect the performance of the remote control. Avoid using when near special fluorescent lights or neon signs.
•
The colour and shape may vary depending on the model.
Connecting to an Aerial
✎
Plug the power cord into a wall outlet only after you have made all other connections.
✎
If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite connections, you do not need to connect the
ANT IN jack to an aerial or a cable connection.
✎
Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may cause the TV to malfunction.
✎
Use caution when you move or swivel the TV if the aerial cable is tightly connected. You could break the aerial jack off the TV.
VHF/UHF Aerial
Cable
Satellite
or
Setup (Initial Setup)
When you turn the TV on for the first time, a sequence of prompts and screens will assist you in configuring basic settings. To begin
Setup
, press the
P
button on your remote.
✎
Setup
is available only when the input source is set to TV. See "Changing the Input Source" (p. 14).
✎
To return to the previous step in the
Setup
sequence, Select
Previous
.
✎
Before you begin, make sure you have connected the TV to an aerial or a cable connection and that the TV is plugged in.
✎
To start the
Setup
select
Start
.
1
Menu Language
:
Select a Language.
Select a menu language you want using your remote, and then select
Next
. The TV will be
displayed a menu using the selected language since next step.
2
Use Mode
: Select the Home
Use Mode.
Select
Home Use
using your remote, and then select
Next
.
Store Demo
mode is for retail environments.
3
Network Settings
: Configure
network settings
✎
To connect later, select
Skip
.
To set up your network connection, select
Next
using your remote. If you do not know your
network set up information or want to set to it later, select
Skip
. For more detailed information,
refer to “Setting up the Wired or Wireless Network” in the e-Manual for set up requirements and
instructions, and the Network Connection section of this manual (p. 18). You can set up the
network connection later using the
Network
menu.
[UE9000-ZG]BN68-04584A-01L04.indb 11
2012-09-05 �� 2:04:26
