The problem
Try this!
The colour is poor or the
picture is not bright
enough.
Go to
Picture
and then adjust the
Picture Mode
,
Brightness
,
Sharpness
and
Colour
settings.
•
Settings
Picture
Picture Mode
•
Settings
Picture
Expert Settings
Brightness
•
Settings
Picture
Expert Settings
Sharpness
•
Settings
Picture
Expert Settings
Colour
See if
Energy Saving Mode
has been enabled.
•
Settings
General
Eco Solution
Energy Saving Mode
Try resetting the picture.
•
Settings
Picture
Expert Settings
Reset Picture
There is a dotted line on the
edge of the screen.
Change
Picture Size Settings
to
16:9 Standard
.
•
Settings
Picture
Picture Size Settings
Picture Size
16:9 Standard
The picture is black and
white.
Check whether
Greyscale
is set to
On
.
•
Settings
General
Accessibility
Greyscale
The picture won’t display in
full screen.
HD channels will have black bars on either side of the screen when displaying upscaled SD
(4:3) content.
Black bars will appear at the top and bottom of the screen when you watch movies that have
aspect ratios different from your TV.
Adjust the picture size options on your external device or set the TV to full screen.
•
Settings
Picture
Picture Size Settings
Picture Size
The
Subtitle
function in the
TV menu is deactivated.
When an external device is connected with an HDMI or Component cable, the
Subtitle
function is unavailable. Adjust the subtitle setting on the external device.
Subtitles appear on the TV
screen.
Turn off the
Subtitle
function in
Subtitle Settings
.
•
Settings
General
Accessibility
Subtitle Settings
Subtitle
The HDR of the connected
external device turns off.
Expand the reception range of the corresponding HDMI input signal in
Input Signal Plus
.
•
Settings
General
External Device Manager
Input Signal Plus
If the test picture does not appear or there is noise or distortion, the TV may have a problem. Contact Samsung’s Call Centre
for assistance.
If the test picture is displayed properly, there may be a problem with an external device. Please check the connections.
If the problem persists, check the
Signal Information
or refer to the external device’s user manual.
- 160 -