English
Securing the TV to the Wall
Caution
: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do
not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all
safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes,
as follows.
To avoid the TV from falling
1.
Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎
You may need additional material such as an anchor depending on
the type of wall.
✎
Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2.
Remove the screws from the centre back of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
3.
Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong string and then tie the string tightly.
✎
NOTE
•
Install the TV near to the wall so that it does not fall backwards.
•
It is safe to connect the string so that the clamps fixed on the wall
are equal to or lower than the clamps fixed on the TV.
•
Untie the string before moving the TV.
4.
Verify all connections are properly secured. Periodically check connections
for any sign of fatigue for failure. If you have any doubt about the security
of your connections, contact a professional installer.
Wall
✎
The product colour and shape may vary
depending on the model.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The
appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the
Kensington Lock for additional information on proper use.
✎
Please find a “
K
” icon on the rear of the TV. A kensington slot is beside the “
K
” icon.
✎
The position and colour may differ depending on the model.
To lock the product, follow these steps:
1.
Wrap the Kensington lock cable around a large, stationary object such as
desk or chair.
2.
Slide the end of the cable with the lock attached through the looped end of
the Kensington lock cable.
3.
Insert the locking device into the Kensington slot on the product.
4.
Lock the lock.
✎
These are general instructions. For exact instructions, see the User
manual supplied with the locking device.
✎
The locking device has to be purchased separately.
<Optional>
English - 15
[UF5070-ZGZTBN68-04901B-03L04.indb 15
2013-11-21 8:59:22
