61
Source AutoSwitch Settings
Source AutoSwitch Settings
Source AutoSwitch Settings
Move
Enter
Return
Source AutoSwitch
Primary Source Recovery
Primary Source
Secondary Source
:
PC
:
DVI
: On
: On
On
Off
-
The displayed image may differ depending on the model.
-
Source AutoSwitch Settings
is disabled if
PIP
is set to
On
.
Source AutoSwitch
When the
Source AutoSwitch
is
On
, the display video source will automatically be searched for active video.
The
Primary Source
selection will be activated, if the current video source is not recognized.
Secondary Source
selection
will become active, if no primary video source is available. If the primary or secondary source is not recognized, the display will
search again, if no active video is found the display will show the no-input-signal message.
When the
Primary Source
selection is set to
All
, the display will search all the video source inputs twice in sequence looking
for an active video source, returning back to the first video source in the sequence if no video is found.
•
Off
/
On
―
Source AutoSwitch
selection and
PIP
function: If the
Source AutoSwitch
selection is set to
On
, the
PIP
function will not
work, the
Source AutoSwitch
selection must be set to
Off
, for the
PIP
feature to work.
―
When the
Source AutoSwitch
selection is
On
, and or the
Primary Source Recovery
is
On
, the display power saving mode
becomes inactive.
―
When
Primary Source Recovery
is
On
, only the
Primary Source
and
Secondary Source
selection are available and they
are interchangeable and selectable at will. Refer to
PIP
>
Source
for compatible signals for each primary input source.
Primary Source Recovery
Source AutoSwitch Settings
Source AutoSwitch Settings
Move
Enter
Return
Source AutoSwitch
Primary Source Recovery
Primary Source
Secondary Source
:
PC
:
: On
: On
On
Off
-
The displayed image may differ depending on the model.
When
Primary Source Recovery
is
On
, only the
Primary Source
and
Secondary Source
video source selection will be
searched for active video.
The
Primary Source
will be selected if active video is found, if no video is found, the
Secondary Source
will be selected, if no
video is found in
Secondary Source
again, the no-input-signal is displayed.
•
Off
/
On