Samsung UD22B Скачать руководство пользователя страница 67

Страница: 67 / 145

Using MDC

3 Using MDC

Alert



Fault Device



This menu shows a list of display devices which have following errors - fan error, temperature

error, brightness sensor error, or lamp error.

Select a display device from the list. The

Repair

button will be enabled. Click the refresh button

to refresh the error status of the display device. The recovered display device will disappear

from the

Fault Device List

Fault Device Alert



Display device in which error is detected will be reported by email.

Fill in all required fields. The

Test

and

buttons will be enabled. Ensure the

Sender

information and at least one

Recipient

are entered.

3.3.9 Screen

Adjustment

The screen settings (contrast, brightness, etc.) can be adjusted.

Choose display devices from the list of sets, and select the

Picture

tab.

Custom

Select an item and change the corresponding screen setting.



Color

and

Tint

are not available if the input source is



Red

Green

Blue

and

PC Screen Adjustment

are not available if the input source is

Video



Color

Tint

Color Tone

Color Temp

Red

Green

Blue

and

PC Screen Adjustment

are not

available if both

PC Source

and

Video Source

are selected.

Contrast



Adjust the contrast for the selected display device.

Brightness



Adjust the brightness for the selected display device.

Color



Adjust the colors for the selected display device.

Tint (G/R)



Adjust the tint for the selected display device.

Содержание UD22B


















































































































































Результаты поиска

Содержание UD22B

Отзывы:

Бренды по названию

Популярные бренды

Samsung UD22B, Руководство пользователя

Результаты поиска

Содержание UD22B

Отзывы:

Бренды по названию

Популярные бренды