85
The problem
Try this!
The
Broadcasting
option
has been deactivated.
Broadcasting
is only available when the
Source
is set to
TV
.
The
Broadcasting
menu cannot be accessed while you watch TV using a cable or
satellite box.
The settings are lost after
5 minutes or every time
the TV is turned off.
If the
Usage Mode
is set to
Retail Mode
, the TV's audio and video settings are
automatically reset every 5 minutes.
Change the
Usage Mode
(
Settings
System
Expert Settings
Usage
Mode
) to
Home Mode
.
There is an intermittent
loss of audio or video.
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables.
Make sure the cables are flexible enough for long term use. If you are mounting the
TV to a wall, we recommend using cables with 90-degree connectors.
There are small particles
on the TV's bezel.
This is part of the product’s design and is not a defect.
The PIP is not available.
PIP is available only when an external device is connected with an HDMI or
Component cable. Note that the function is unavailable when the Smart Hub is
active or the
Sports Mode
is
On
.
A POP (TV’s internal
banner ad) appears on
the screen.
Change the
Usage Mode
(
Settings
System
Expert Settings
Usage
Mode
) to
Home Mode
.
The TV is making a
popping noise.
The expansion and contraction of the TV's outer casing may cause a popping noise.
This does not indicate a product malfunction. The TV is safe to use.
The TV is making a
humming noise.
Your TV utilises high-speed switching circuits and high levels of electrical current.
Depending on the TV's brightness level, the TV may seem slightly noisier than a
conventional TV.
Your TV has undergone strict quality control procedures that meet our demanding
performance and reliability requirements.
Some noise coming from the TV is considered normal and is not an acceptable
cause for an exchange or refund.