Pairing the TV to the Samsung Smart Remote
When you turn on the TV for the first time, the
Samsung Smart Remote
pairs to the TV automatically. If the Samsung Smart Remote does not pair
to the TV automatically, point it at the remote control sensor of the TV, and
then press and hold the buttons labelled and
in the following figure
simultaneously for 3 seconds or more.
Installing batteries into the Samsung Smart Remote
To install the batteries, push the rear cover open in
the direction of the arrow and insert the batteries as
shown in the figure. Make sure that the positive and
negative ends are facing in the correct direction.
- Alkaline batteries are recommended for longer
battery life.
Using the TV Controller
Turn on the TV with the
TV Controller
button on the bottom of the TV and then use the control menu. The
Control
menu
appears when the button is pressed while the TV is On. For more information about its usage, refer to the
figure below.
Control menu
: Power off
: Volume Up
: Channel Up
: Volume Down
: Channel Down
: Source
TV Controller
/ Remote control sensor
Press: Move
Press & Hold: Select
The
TV Controller
is placed at the bottom
of the TV.
English - 5
UKS7000S_Asia_BN68-07929A-02_ENG.indb 5
2016-04-27 �� 2:11:46
