Samsung UA40C7000, Руководство пользователя

Страница: 31 / 60

28
English
4. Input the generated Network Name (SSID) and
Security Key into the device you want to connect.
How to connect an existing Ad-hoc device
1.
Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 31).
2.
Choose
Select a network
. The Device/Network list
appears.
3. Select the device you want in the Device list.
4. If security key is required, input the security key.
If network doesn’t operate normally, check the Network
Name (SSID) and Security Key again. An incorrect
Security Key may cause a malfunction.
Network Setup (Manual)
If the other methods do not work, you need to enter the
Network setting values manually.
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu, click Status.
3.
On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The
Network settings are displayed.
How to set up manually
To enter the Network connection values manually, follow
these steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 31).
2. Press the ▼ button to select Internet Protocol Setup ,
and then press the ENTER E button. Press the
▲
or ▼ button to select Manual , and then press the
ENTER E
button.
3. Press the ▼ button to go to the first entry field (IP
Address).
4. Use the number buttons to enter numbers.
5. When done with each field, use the
►
button to move
successively to the next field. You can also use the other
arrow buttons to move up, down, and back.
6. Enter the IP Address , Subnet Mask , and Gateway
values.
7. Press the ▲ or ▼ button to go to DNS .
8. Press the
▼
button to go to the first DNS entry field.
Enter the numbers as above.
9. When done, press the ▲ button to go to Select a
Network
. Select your network, and then press the
ENTER E button.
10.
Go to Step 4 in the “How to set up automatically” (p.
32), and follow the directions from that point on.
SWL(Samsung Wireless Link)
This function lets you connect a Samsung device that
supports the PBC (WPS) to your TV. You can connect
devices to the TV even if a sharer is not connected to the TV.
✎
To use the Internet@TV, the AP (access point) must be
connected to the wireless network.
✎
If a Samsung Wireless LAN Adapter is connected to the
USB 2 port, the network may not operate normally. We
recommend to connecting it to the USB1(HDD) port.
✎
Only sharers using the 2.4 Ghz band are supported.
Sharers using the 5 Ghz band are not supported.
SWL Connect
You can directly connect a device that supports the PBC
(WPS) to the TV.
✎
This function is available when SWL (Samsung Wireless
Link) is set to On.
How to Connect Samsung Wireless Link
For the procedures to establish a connection, refer to the
following:
1. Follow the Steps 1 through 5 in the “How to set up using
PBC(WPS)”.
2. Select SWL ( Samsung Wireless Link) by using the ▼
button and press the
ENTER E
button to turn it on.
3. Select SWL connect by using ▼ button and press the
ENTER E
button t.
4. If the “ Press the PBC button on the device which
supports PBC button to connect within 120
seconds
” message appears, press the PBC button on
the device to connect.
✎
For more information, refer to the wireless network
setup manual of the device to be connected.
5 If the device is connected properly to the TV after
starting count on message box then message box will
be disappeared automatically.
✎
If the connection fails, please retry after 2 minutes.
¦ If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because
your ISP has permanently registered the MAC address (a
unique identifying number) of your PC or modem, which it
then authenticates each time you connect to the Internet as
a way of preventing unauthorized access. As your TV has
a different MAC address, your ISP can not authenticate its
MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures
required to connect devices other than a PC (such as your
TV) to the Internet.
If your Internet service provider requires an ID or password to
connect to the Internet, your TV may not be able to connect
to the Internet. If this is the case, you must enter your ID or
password when connecting to the Internet.
The internet connection may fail because of a firewall