Samsung UA32M4100, Руководство пользователя

Страница: 14 / 36

English - 14
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press
the POWER
P
button. Setup is available only when the source is set to TV.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the Change PIN function.
You should do Setup ( MENU → System ) again at home even though you did in shop already.
• If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which
resets the PIN to “0-0-0-0”:
MUTE → 8 → 2 → 4 → POWER (on)
Using the TV Controller
You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu . The
Control menu appears when the TV Controller is pressed while the TV is On. For more information about its usage,
refer to the figure below.
: Power off : Volume Up
: Channel Up : Volume Down
: Channel Down : Source
Control menu
TV Controller / Remote control sensor
Press: Move
Press & Hold: Select
The TV Controller is placed at the bottom
of the TV.
04 Initial Setup