background image

20

Connecting and Using a Source Device

Chapter  03

Read below before installing the monitor.

Check the shapes of both ends of the cables that came with the monitor, and check the shapes and 
positions of the matching ports on the monitor and external devices.

Before connecting signal cables, disconnect the power cables for the monitor and external devices 
from the power outlet to prevent device damage from a short circuit or overcurrent.

After connecting all signal cables, connect the power cables for the monitor and external devices 
to the power outlet.

Read the user manual to familiarize yourself with the monitor functions, precautions, and proper 
use, before using the installed monitor.

Connecting and Using a PC

Select a connection method suitable for your PC.

 

Connecting parts may differ in different products.

 

Provided ports may vary depending on the product.

Connection Using the HDMI Cable

Check to make sure that the power cables for the monitor and external devices, such as 
computers and set-top boxes, are not connected to the power outlet.

HDMI IN

 

To display 3840 x 2160 @ 60 Hz, use an HDMI cable that supports 3840 x 2160 @ 60 Hz to connect HDMI. 
Make sure that the graphics card of the HDMI source supports 3840 x 2160 @ 60 Hz.

 

When connecting an HDMI cable, use the cable that came with the components of the monitor. If you use 
an HDMI cable other than provided by Samsung, the image quality may be degraded.

Содержание U32R59 Series













































Отзывы: