English - 3
Input - Source List / Edit Name
Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top
box, and the TV source
(broadcast or cable).
➢
Press the
SOURCE
button on the remote control
repeatedly to select the desired signal source.
Edit Name
You can give a name to the
external source.
Setup - Plug & Play
When the TV is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
1
Press the
POWER
button on
the remote control.
The “Start Plug & Play” is
displayed. Press the
ENTER
button, then the “Language”
is displayed.
2
Press the ▲ or ▼ button to
select the desired language,
then press the
ENTER
button. The “Check antenna
input.” is displayed.
3
Make sure that the antenna
is connected to the TV.
Press the
ENTER
button,
then the “Auto Program” is
displayed.
4
Press the
ENTER
button
to start. The TV begins
memorizing all available
channels. Press the
ENTER
button to stop.
5
After all available channels
are stored, the “Clock Set” is
displayed.
Press the ◄ or ► button to
move to the hour or minute.
Set the clock by pressing the
▲ or ▼ button.
continued...
6
When you have finished,
press the
MENU
button.
The “Enjoy your watching.” is
displayed.
➢
Plug & Play feature
doesn’t work in the AV
mode.
Re-setting the Plug & Play
Method:
MENU
▲/▼ (Setup)
ENTER
▲/▼ (Plug & Play)
ENTER
Channel - Memorizing the Channels
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
are memorized, use the
CH
and
CH
buttons to scan
through the channels.
This eliminates the need to change channels by entering the
channel digits. There are three steps for memorizing channels:
“Air/Cable”, “Auto Program” and “Add/Delete”.
Air/Cable
Before your TV can begin
memorizing the available
channels, you must specify
the type of signal source
that is connected to the TV
(i.e., an antenna or a cable
system).
Select “Air”, “STD”, “HRC”, or “IRC” by pressing the ▲ or
▼ button.
Auto Program
All available channels are
automatically stored in
memory when channels are
selected by the direct tuning
function.
Press the
ENTER
button
at any time to interrupt the
memorization process.
Add/Delete
You can add or delete
a channel to display the
channels you want only.
To use the “Add/Delete”
function, first run Auto
Program.
Select “Deleted” or “Added”
by pressing the ▲ or ▼
button.
Plug & Play
Move
Enter
Skip
Language
English
Español
Português
Français
Plug & Play
Enter
Return
OK
Start Plug & Play
Plug & Play
Enter
Skip
Auto Program
Air 3
3%
Stop
Move
Enter
Return
Edit Name
AV1
: ----
AV2
: ----
Component
: ----
- - - -
VCR
DVD
Cable STB
Sat. STB
AV Receiver
DVD Receiver
▼
Enjoy your watching.
OK
Plug & Play
Clock Set -- : -- am
Move
Enter
Skip
Move
Enter
Return
Source List
TV
AV1
- - - -
AV2
- - - -
Component
- - - -
Move
Enter
Return
Setup
Plug & Play
►
Language
: English
►
Time
►
Caption
►
V-Chip
►
Blue Screen : Off
►
Melody
: On
►
Demonstration
►
Move
Enter
Return
Channel
Air/Cable
:Air
Auto Program
Add/Delete
Fine Tune
Name
Search
Enter
Return
Air 3
3%
Stop
Move
Enter
Return
Add/Delete
▲ More
2
:
Deleted
3
: Deleted
4
: Deleted
5
: Deleted
6
: Deleted
▼ More
Deleted
Added
Plug & Play
Enter
Skip
OK
Check antenna input.
Air
STD
HRC
IRC
AA68-03905M-X0_Eng.indd 3
2007-02-07 ｿﾀﾀ・10:47:32
