Setting the Combi Vision to Switch On Automatically
You can set your COMBI VISION to switch on automatically every
day and stop after one hour if none of its functions are used.
➢
Before using this function, check that the time has been
correctly set. If it has not been set, the time and date
setting function is activated automatically; refer to
page 12 for further details.
1
Press MENU (
).
2
Select
SETUP
by pressing the P
▲
or
▼
buttons the required number of
times.
3
Press the + button.
Result:
The corresponding menu is displayed.
4
Select
ON TIMER
by pressing the P
▲
or
▼
buttons the required number of
times.
5
To...
Then...
Set the time at which the
1 Press the + button to display the clock.
television is to switch on
2 Select the hour and minutes by
pressing the numeric buttons.
Cancel the automatic
Press the + button once.
switch on timer
Result:
OFF
is displayed.
6
Place the set in Standby mode, by pressing POWER (
).
Result:
The set will be switched on every day at the time requested
and will remain on for one hour if no other function is used
during this time.
22
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST
SELECT
EXIT
SETUP
PANEL LOCK
: OFF
ON TIMER
: ON
ADJUST
SELECT
EXIT
GB
TIME
: 15:07
DATE
: 06/04/00 THU
ADJUST
SELECT
EXIT
You can switch the sound off temporarily.
Example: You wish to answer the telephone.
1
Press the MUTE (
) button on the remote control.
Result:
The sound is switched off and
is displayed on the screen.
2
When you wish to turn the sound back on, press the same MUTE (
)
button again or press the VOL + button.
Result:
The sound returns at the same volume as before and the
indication disappears.
Switching the Sound Off Temporarily (MUTE)
V.MENU
MUTE
P
