Setting the Date and Time
Your COMBI VISION contains a 24-hour clock and calendar used
to:
◆
Preset the VCR to record up to six programmes
automatically over a period of one month
◆
Switch the set on or off automatically at a specific time
You must set the date and time when:
◆
You purchase the COMBI VISION
◆
The power supply is switched or cut off
1
Press MENU (
) on the remote control.
Result:
The television menu is displayed.
2
Select the
option by pressing P
▲
or
▼
the appropriate number of
times, followed by the + button.
Result:
The current date and time are displayed.
3
Enter the hour and then the minutes by pressing the numeric buttons.
➢
When a time is entered, all single digits must be preceded by a
zero.
Example:
3:07 p.m.
Enter 15:07
4
To select the date, press P
▼
.
5
Press the numeric, + or - buttons to enter the:
◆
Day
◆
Month
◆
Year
Result:
The day of the week is displayed automatically next to the date.
➢
When a date is entered, all single digits must be preceded by a
zero.
Example:
6th April 2000
Enter 06/04/00
6
When you are satisfied with your settings, press MENU (
) twice to
return to normal viewing.
➢
If you do not press a button for more than 30 seconds, the
display disappears automatically.
If you make a mistake when entering the date or time,
press the
-
button one or more times to return to the
incorrect figure and enter the correct one.
You cannot set the date and time during a programmed
recording.
12
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST
SELECT
EXIT
TIME
: 15:07
DATE
: 06/04/00 THU
ADJUST
SELECT
EXIT
GB
V.MENU
MUTE
DISPLAY
P.STD
MENU
P
P
Pre.
