14
English
Connections
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
ANT OUT
VHF/UHF Antenna
Cable
or
Setup (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWEr
P
button.
✎
Setup
is available only when the Input
Source
is set to
TV
.
1
Selecting a language
Press the
▲
or
▼
button, then press the
ENTEr
E
button. Select the
desired OSD (On Screen Display) language.
P
INFO
GUIDE
2
Selecting
Store Demo
or
Home use
Press the
▲
or
▼
button, then press the
ENTEr
E
button.
y
Select the
Home use
mode.
Store Demo
mode is for retail
environments.
y
To return the unit’s settings from
Store Demo
to
Home use
(standard):
Press the volume button on the TV. When you see the volume OSD,
press and hold
MENu
for 5 sec.
y
Store Demo
is only for shop display. If you select it, several functions
are not able to use. Please select
Home use
when you watch at
home.
3
Auto Program
Let’s find and store channels on your TV. Do you need to search for channels?
y
Yes, I need to.
All the channels available will be found and stored on your TV.
y
No, I don’t need to.
My set-top box provides all the channels that are available, so I don't need to
searh for channels.
✎
You can complete
Setup
by selecting it.
To run auto program, please select
Next
button. Then set the search options for anto tuning.
y
If the antenna is connected to
aNT 1 IN (aIr)
, select
air
and if it is connected to
aNT 2 IN (CaBLE)
,
select
Cable
. After selecting the antenna source to memorize, select
Next
. The TV will begin
memorizing all of the available channels.
4
Setup Clock
Set the
Clock Mode
automatically or manually.
y
auto
: Allows you to select time zone.
y
Manual
: Allows you to manually set the current date and time.
y
Select time zone you are in by pressing the
u
or
d
button.
Press the
ENTEr
E
button to confirm your choice.
✎
If the customer choose
"Manual"
set clock, this step doesn't display.
5
Complete
Press the
ENTEr
E
button.
If You Want to reset This Feature...
MENu
m
→
System
→
Setup
→
ENTEr
E
You should do
Setup
again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-
0-0”:
POWEr
(off)
→
MuTE
→
8
→
2
→
4
→
POWEr
(on).
Connections