15
English
Connections
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button.
Plug & Play
is available only when the Input
Source
is set to
TV
.
✎
Before turning on the TV, make sure the antenna cable is connected.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the desired OSD (On Screen Display) language.
P
POWER
2
Selecting
Store Demo
or
Home Use
Press the
◄
or
►
button, then press the
ENTER
E
button.
y
Select the
Home Use
mode.
Store Demo
Mode is for retail
environments.
y
To return the unit’s settings from
Store Demo
to
Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold
MENU
for 5 sec.
y
Store Demo
is only for shop display. If you select it, several
functions are not able to use. Please select
Home Use
when you
watch at home.
3
Selecting a country
Press the
u
or
d
button, then press the
ENTER
E
button. Select the appropriate
country.
✎
After selecting the country in the
Country
menu, some models may proceed with an
additional option to setup the pin number. When you input the PIN number, “0-0-0-0”
is not available.
4
Setting the
Clock Mode
Set the
Clock Mode
automatically or manually.
5
Selecting an antenna
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the
Antenna
source to memorise.
6
Selecting a channel
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the channel source to memorise. When setting the antenna source to
Cable
, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to
Channel
→
Auto Tuning
(p. 24).
7
Enjoy your TV.
Press the
ENTER
E
button.
If You Want to Reset This Feature...
Select
System - Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”
(France: “1-1-1-1”). If you want to change the PIN number, use the
Change PIN
function.
You should do
Plug & Play
(
MENU
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0”(France: “1-1-1-1”):
POWER
(off)
→
MUTE
→
8
→
2
→
4
→
POWER
(on).
ANT OUT
Connections
