can handle properly.
If the display exceeds SXGA or
75 Hz, a
"Not Optimum
Mode","Recommended Mode
1280 x 1024 60 Hz"
message is
displayed. If the display exceeds
85 Hz, the display will work
properly but the
"Not Optimum
Mode","Recommended Mode
1280 x 1024 60 Hz"
message
appears for one minute and then
disappears.
Please change to the
recommended mode during this
one-minute period.
(The message is displayed again
if the system is rebooted.)
Connected using the DVI cable?
You may get a blank screen if
you boot the system before you
connect the DVI cable, or
disconnect and then reconnect
the DVI cable while the system
is running as certain types of
graphic cards do not send out
video signals.
Connect the DVI cable and then
reboot the system.
I cannot see the On Screen
Display.
Have you locked the On Screen
Display (OSD) Menu to prevent
changes?
Unlock the OSD by pressing the
MENU/
button for at least 5
seconds.
The screen shows strange
colors or just black and
white.
Is the screen displaying only one
color as if looking at the screen
through a cellophane paper?
Check the signal cable
connection.Make sure the video
card is fully inserted in it's slot.
Have the screen colors become
strange after running a program or
due to a crash between
applications?
Reboot the computer.
Has the video card been set
properly?
Set the video card by referring to
the video card manual.
The screen suddenly has
become unbalanced.
Have you changed the video card
or the driver?
Adjust screen image position
and size using the OSD.
Have you adjusted the resolution
or frequency to the monitor?
Adjust the resolution and
frequency at the video card.
(Refer to the
Preset Timing
Modes
).
The screen can be unbalanced due to the cycle of the video card
signals. Readjust Position by referring to the OSD.
The screen is out of focus
or OSD cannot be adjusted.
Have you adjusted the resolution
or frequency on the monitor?
Adjust the resolution and
frequency of the video card.
(Refer to the
Preset Timing
Modes
).
LED is blinking but no
images on the screen.
Is the frequency properly adjusted
when checking the Display Timing
on the menu?
Adjust the frequency properly by
referring to the video card
manual and the
Preset Timing
Modes
.
(The maximum frequency per
resolution may differ from
product to product.)
There are only 16 colors
shown on the screen.
The screen colors have
Have the Windows colors been set
properly?
Windows ME/2000/XP:
Set the colors properly at the
Control Panel
→
Display
→
