•
Session Type
The Session Type allows configuring the Portal for a PC-over-IP session or RDP session.
•
Identify Peer By
The
Identify Peer By
selector allows the administrator to choose whether the peer device is iden-
tified by IP and MAC address, or by Fully Qualified Domain Name (FQDN). If Accept Any Peer
is enabled, these fields are not required and are not editable.
•
Enable Auto-Reconnect
The
Enable Auto-Reconnect
option allows the Portal to automatically reconnect with the last
connected Host after a power-cycle.
Note
If the
Enable Auto-Reconnect
option is selected, even if the monitor is disconnected from the
server by pressing the Disconnect button, the monitor screen does not return to the initial settings
screen and is reconnected to the server automatically. Users can deselect the Enable Auto-Recon-
nect option by connecting to the client through the Web Interface.
•
Session Timeout
The
Session Timeout
configures the timeout for a connection. If the timeout period elapses without
the PC-over-IP processor detecting a network, the PC-over-IP processor will disconnect the ses-
sion.
Bandwidth
The
Bandwidth
tab allows limiting the Portal bandwidth.
•
Device Bandwidth Limit
The
Device Bandwidth Limit
parameter defines the maximum bandwidth for the PC-over-IP
system. The
Bandwidth
setting on the Portal side defines the bandwidth from the Portal to Host
(e.g. USB data).
Although the maximum bandwidth may be configured, the PC-over-IP system will continue to use
only the bandwidth required up to the Device
Bandwidth
maximum. Due to normal usage sce-
narios, this allows effective bandwidth sharing, as it is unlikely that all PC-over-IP sessions will
require the maximum at all times.
Using the Software
